HoKon offers you a very large selection of torque hinges and detent hinges in various torques, dimensions, leg widths and shapes. If you are looking for a hinge in a different design to the one shown here, please do not hesitate to contact us. We manufacture customised workpieces on request - even in very small quantities!
To familiarise yourself with the functions of the individual torque hinges, download the catalogue extract ‘Chapter PDF’. There you will find application videos.
Serie 6871
drilled and countersunk
Holding torque: 0 – 1 Nm. max., Adjusting screw: internal hex 2,5, temperaturee stability: -20 °C up to + 80 °C
max. tensile strength: 2240 N, max. shear strength: 1050 N
Art.-No. | Dimensions | Material |
---|---|---|
6871.01.70 | 30 x 35 x 3 mm | Alu 6060 T5 untreated |
6871.01.77 | 30 x 35 x 3 mm | Alu 6060 T5 black |
6871.02.70 | 30 x 35 x 3 mm | Alu 6060 T5 anodised |
Serie 6871
drilled and countersunk
Holding torque: 0 - 5 Nm, max. Adjusting screw: internal hex 4, temperaturee stability: -20 °C up to +80 °C.
max. tensile strength: 6000 N, max. shear strength: 5000 N
Art.-No. | Dimensions | Material |
---|---|---|
6871.04.70 | 65 x 55 x 4,5 mm | Alu 6060 T5 colourless |
6871.04.77 | 65 x 55 x 4,5 mm | Alu 6060 T5 black |
Serie 6871
drilled and countersunk
Holding torque: 0 - 5 Nm, max. Adjusting screw: internal hex 4, temperaturee stability: -20 °C up to +80 °C.
max. tensile strength: 6000 N, max. shear strength: 5000 N
Art.-No. | Dimensions | Material |
---|---|---|
6871.05.70 | 65 x 55 x 4,5 mm | Alu 6060 T5 colourless |
6871.05.77 | 65 x 55 x 4,5 mm | Alu 6060 T5 black |
Serie 6876
drilled and countersunk
Soft-Close Hinge
Opens and closes damped Function until 115° guaranteed, torque: 2,5 up to 4,5 Nm
Art.-No. | Dimensions | Material |
---|---|---|
6876.05.71 | 100 x 82,5 x 5,5 mm | Alu 6060 T5 colourless |
6876.06.71 | 100 x 82,5 x 5,5 mm | Alu 6060 T5 colourless |
6876.07.71 | 100 x 82,5 x 5,5 mm | Alu 6060 T5 colourless |
Serie 6870
drilled
Stable torque: -40°C - +80°C,
3 Nm
Polyethylenee cover
Art.-No. | Dimensions | Material |
---|---|---|
6870.01.30 | 85 x 55 x 2mm | Stainless steel 1.4310 untreated |
Serie 6870
drilled
Stable torque: -40°C - 80°C,
free running
Polyethylenee cover
Art.-No. | Dimensions | Material |
---|---|---|
6870.02.30 | 85 x 55 x 2mm | Stainless steel 1.4301 untreated |
Serie 6877
drilled
Soft-Close Hinge with built-in damper and constant torque
Function until 115° guaranteed, torque pro Paar: 2,2 up to 3,0 Nm, temperaturee resistance: 0 °C- 40 °C
Art.-No. | Dimensions | Material |
---|---|---|
6877.01.30 | 80 x 80 x 3 mm | Stainless steel untreated |
Serie 150.SK-T-ZA
drilled and countersunk
With constant torque.
Cover made of chrome plated plastic
Art.-No. | Dimensions | Material |
---|---|---|
150.SK-T-ZA1CR.03 | 61 x 50 x 4,5 mm | Zamak chrome-plated |
150.SK-T-ZA2CR.03 | 61 x 50 x 4,5 mm | Zamak chrome-plated |
150.SK-T-ZA3CR.03 | 61 x 50 x 4,5 mm | Zamak chrome-plated |
Serie 150.HG-TS
drilled
With constant torque.
temperaturee resistance: -10 °C ~ 50 °C, Operating humidity: ~ 90% RH (or less)
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TS03.30 | 36 x 32 x 1,2 mm | Stainless steel polished |
Serie 150_HG-TS
drilled
With constant torque
temperaturee resistance: -10 °C ~ 50 °C, Operating humidity: ~ 90% RH (or less)
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TS07.30 | 48 x 40 x 1,2 mm | Stainless steel polished |
Serie 150_HG-TS
drilled
With constant torque
temperaturee resistance: -10 °C ~ 50 °C, Operating humidity: ~ 90% RH (or less)
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TS15.30 | 48 x 50 x 2 mm | Stainless steel polished |
Serie 6870
drilled
Stable torque: -40°C - +80°C,
5 Nm
Polyethylenee cover.
Art.-No. | Dimensions | Material |
---|---|---|
6870.03.30 | 85 x 55 x 2 mm | Stainless steel 1.4310 untreated |
Serie 6870
drilled
Stable torque: -40°C - +80°C,
8 Nm
Polyethylenee cover.
Art.-No. | Dimensions | Material |
---|---|---|
6870.05.30 | 85 x 65 x 3mm | Stainless steel 1.4310 untreated |
Serie 6870
drilled
Stable torque: -40°C - +80°C,
free running
Polyethylenee cover
Art.-No. | Dimensions | Material |
---|---|---|
6870.04.30 | 85 x 55 x 2 mm | Stainless steel 1.4301 untreated |
Serie 6870
drilled
Stable torque -40°C- +80°C,
free running
Polyethylenee cover
Art.-No. | Dimensions | Material |
---|---|---|
6870.06.30 | 85 x 65 x 3mm | Stainless steel 1.4301 untreated |
Serie 6870
drilled
Stable torque: -40°C - +80°C,
4,5 Nm
Polyethylenee cover
Art.-No. | Dimensions | Material |
---|---|---|
6870.07.30 | 115 x 55 x 2mm | Stainless steel 1.4310 untreated |
Serie 6870
drilled
Stable torque -40°C- +80°C,
free running
Art.-No. | Dimensions | Material |
---|---|---|
6870.08.30 | 115 x 55 x 2mm | Stainless steel 1.4301 untreated |
Serie 150.SFTH
drilled
With constant torque.
temperaturee resistance: -20 °C ~ 60 °C
Art.-No. | Dimensions | Material |
---|---|---|
150.SFTH-02-5.30 | 40 x 35 x 1,2 mm | Stainless steel polished |
Serie 150.SFTH
drilled
With constant torque.
temperaturee resistance: -20 °C ~ 60 °C
Art.-No. | Dimensions | Material |
---|---|---|
150.SFTH-03-9.30 | 50 x 42,5 x 2 mm | Stainless steel polished |
150.SFTH-03-19.30 | 50 x 42,5 x 2 mm | Stainless steel polished |
Serie 150.SFTH
drilled
With constant torque.
temperaturee resistance: -20 °C ~ 60 °C
Art.-No. | Dimensions | Material |
---|---|---|
150.SFTH-05-35.30 | 90 x 82,5 x 2,5 mm | Stainless steel polished |
150.SFTH-05-58.30 | 90 x 82,5 x 2,5 mm | Stainless steel polished |
Serie 150.HG-TA
drilled
With constant torque.
temperaturee resistance: 0 °C ~ 40° C
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TA20L.30 | 18,5 x 66 x 2 mm | Stainless steel polished |
150.HG-TA20R.30 | 18,5 x 66 x 2 mm | Stainless steel polished |
150.HG-TA30L.30 | 18,5 x 66 x 2 mm | Stainless steel polished |
150.HG-TA30R.30 | 18,5 x 66 x 2 mm | Stainless steel polished |
Serie 150.HG-TB
drilled and countersunk
With constant torque.
temperaturee resistance: 0 °C ~ 40° C
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TB7L.30 | 52,5 x 76 x 2 mm | Stainless steel polished |
150.HG-TB7R.30 | 52,5 x 76 x 2 mm | Stainless steel polished |
150.HG-TB20R.30 | 52,5 x 76 x 2 mm | Stainless steel polished |
150.HG-TB30L.30 | 52,5 x 76 x 2 mm | Stainless steel polished |
150.HG-TB30R.30 | 52,5 x 76 x 2 mm | Stainless steel polished |
Serie 150.HG-TB
drilled and countersunk
With constant torque.
temperaturee resistance: 0 °C ~ 40° C
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TB45L.30 | 61 x 88 x 3 mm | Stainless steel untreated |
150.HG-TB45R.30 | 61 x 88 x 3 mm | Stainless steel untreated |
Serie 150.HG-TA
drilled
With constant torque.
temperaturee resistance: 0 °C ~ 40° C
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TA45L.30 | 23,5 x 80 x 2 mm | Stainless steel polished |
150.HG-TA45R.30 | 23,5 x 80 x 2 mm | Stainless steel polished |
Serie 150.HG-IT
drilled
With constant torque.
temperaturee resistance: -10 °C ~ 50 °C, aperture angle: approx.190°
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-ITS25.30 | 54 x 44 x 2 mm | Stainless steel polished |
150.HG-ITS35.30 | 54 x 44 x 2 mm | Stainless steel polished |
150.HG-ITSF.30 | 54 x 44 x 2 mm | Stainless steel polished |
Serie 150.HG-IT
Cover for Art. No. 150.HG-IT
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-ITSC.30 | / | ABS silver-metallic |
150.HG-ITMC.30 | / | ABS silver-metallic |
Serie 150.HG-IT
drilled
With constant torque.
temperaturee resistance: -10 °C ~ 50 °C, aperture angle: approx.190°
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-ITM50.30 | 54 x 80 x 2 mm | Stainless steel polished |
150.HG-ITM70.30 | 54 x 80 x 2 mm | Stainless steel polished |
150.HG-ITMF.30 | 54 x 80 x 2 mm | Stainless steel polished |
Serie 6493
drilled
Hinge for invisible fence with constant torque
Only for indoor applications. Can be used horizontally or vertically.
Art.-No. | Dimensions | Material |
---|---|---|
6493.01.33 | 40 x 67 x 1,5 mm | Stainless steel polished |
Serie 150.HG-T30
drilled
2-axis hinge with constant torque.
temperaturee resistance: 0 °C ~ 40 °C, Provides torque stability in both directions, Tilting: 2,9 Nm, Swivelling: 1,4 Nm. Suitable for monitor screens.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-T30.S15.30 | 60 x 51,5 x 2 mm | Stainless steel 1.4016 polished |
Serie 150.HG-T70
drilled and countersunk
2-axis hinge with constant torque.
temperaturee resistance: 0 °C ~ 40 °C, Provides torque stability in both directions. Tilting: 7 Nm, Swivelling: 3 Nm. Suitable for monitor screens.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-T70.S30.30 | 50 x 76 mm | Stainless steel 1.4016 polished |
Serie 150.KA-T100S50
drilled
Monitor bracket with constant torque and Zusatzsperre
Swivelling 180°, Tilting 40°. Applicable monitor size: 12 ~ 22,9 inch (up to approx. 10,0 kg)
Art.-No. | Dimensions | Material |
---|---|---|
150.KA-T100S50 | 112 x 112 mm | Stainless steel 1.4016 |
Serie 150.KA-150
drilled
including hex key (for fixing the mounting base)
Monitor mount is used for moving and adjusting monitor position.
Art.-No. | Dimensions | Material |
---|---|---|
150.KA-150 | 90 x 90 x 150 mm | / |
Serie 150.TV
drilled
Monitor bracket for wall mounting.
Used to fix a small display on the wall (max. 8 kg).
Art.-No. | Dimensions | Material |
---|---|---|
150.TV-400SK | 195 x 134 x 40 mm | / |
Serie 150_TV
drilled
Monitor bracket for wall mounting.
Used to fix a small display on the wall (max. 8 kg).
Der einstellbare Typ (150.TV-410SK)
kann den Winkel des Monitors approx. 20 °
aus dem senkrechten Zustand nach vorne kippen.
Art.-No. | Dimensions | Material |
---|---|---|
150.TV-410SK | 195 x 134 x 60 mm | / |
Serie 150.HG-TQJ100
drilled
Adjustable one way torque hinge.
temperaturee resistance: 0 ~ 40 °C, aperture angle approx. (248°). Allows for frictionless handling of the door in the opposite direction.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TQJ100-A.53 | 55 x 60 x 7,5 mm | Zamak matt chrome-plated |
150.HG-TQJ100-B.53 | 55 x 60 x 7,5 mm | Zamak matt chrome-plated |
Serie 150.HG-TUWA
drilled
Concealed hinge with fence and constant torque
aperture angle (130°). Can be used horizontally or vertically.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TUWA07.33 | 50 x 61 x 1,5 mm | Stainless steel polished |
150.HG-TUWA15.33 | 50 x 61 x 1,5 mm | Stainless steel polished |
Serie 150.HG-ITJ4080
drilled
with adjustable torque
temperaturee resistance: 0 ~ 40 °C, aperture angle (265°).
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-ITJ4080.30 | 43 x 80 x 2,5 mm | Stainless steel trowalised |
Serie 150.HG-ITHP
drilled
With constant torque.
temperaturee resistance: 0 ~ 100 ° C, aperture angle approx. (269°).
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-ITHP07.30 | 60 x 44 | Stainless steel trowalised |
150.HG-ITHP15.30 | 60 x 44 | Stainless steel trowalised |
150.HG-ITHP30.30 | 60 x 44 | Stainless steel trowalised |
Serie 150.HG-TLS30
drilled
Stangenscharnier with constant torque.
aperture angle approx. 295°.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TLS30-50-300.30 | 50 x 300 x 1,5 mm | Stainless steel untreated |
Serie 150.HG-DTB
drilled and countersunk
Hinge mit konstantemDrehmoment and with adjustable torque.
temperaturee resistance: 0 ~ 40 °C, aperture angle approx. 168°.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-DTB4-R.33 | 33 x 51,5 x 2,5 mm | Stainless steel polished |
150.HG-DTB4-L.33 | 33 x 51,5 x 2,5 mm | Stainless steel polished |
150.HG-DTB8-R.33 | 33 x 51,5 x 2,5 mm | Stainless steel polished |
150.HG-DTB8-L.33 | 33 x 51,5 x 2,5 mm | Stainless steel polished |
Serie 150.HG-TASJ40
drilled
With adjustable torque.
temperaturee resistance: 0 ~ 40 °C, aperture angle approx. 269°.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TASJ40R.33 | 80 x 18,5 x 2 mm | Stainless steel polished |
150.HG-TASJ40L.33 | 80 x 18,5 x 2 mm | Stainless steel polished |
Serie 150.HG-TBSJ40
drilled and countersunk
With adjustable torque.
temperaturee resistance: 0 ~ 40 °C, aperture angle approx. 270°.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TBSJ40R.33 | 40 x 61 x 2 mm | Stainless steel polished |
150.HG-TBSJ40L.33 | 40 x 61 x 2 mm | Stainless steel polished |
Serie 150.HG-RT
drilled and countersunk
Concealed hinge with decreasing torque.
temperaturee resistance: 0 ~ 40 °C, aperture angle 0 ° ~ 100°
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-RT30.53 | 52,6 x 70 x 6,5 mm | Zamak chrome-plated |
150.HG-RT50.53 | 52,6 x 70 x 6,5 mm | Zamak chrome-plated |
Serie 150.HG-KNT
drilled
With constant torque, lift-off type.
Can be used vertically and horizontally.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-KNT3L.33 | 50 x 35 x 2 mm | Stainless steel polished |
150.HG-KNT3R.33 | 50 x 35 x 2 mm | Stainless steel polished |
Serie 150_HG-KNT
drilled
With constant torque, lift-off type.
Can be used vertically and horizontally.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-KNT7L.33 | 65 x 50 x 2 mm | Stainless steel polished |
150.HG-KNT7R.33 | 65 x 50 x 2 mm | Stainless steel polished |
Serie 150_HG-KNT
drilled
With constant torque, lift-off type
Can be used vertically and horizontally.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-KNT16L.33 | 75 x 50 x 2mm | Stainless steel polished |
150.HG-KNT16R.33 | 75 x 50 x 2mm | Stainless steel polished |
Serie 150.HG-TMH
drilled and countersunk
2-axis torque hinge.
180° swivelling. Suitable for folding table of shop and train.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-TMH1530.53 | 43,5 x 55 x 16,75 mm | Zamak Nickel satinised |
150.HG-TMH2030.53 | 43,5 x 55 x 16,75 mm | Zamak Nickel satinised |
150.HG-TMH1530-SN.51 | 43,5 x 55 x 16,75 mm | Zamak black |
150.HG-TMH2030-SN.51 | 43,5 x 55 x 16,75 mm | Zamak black |
150.HG-TMH1530-BL.57 | 43,5 x 55 x 16,75 mm | Zamak chrome-plated |
150.HG-TMH2030-BL.57 | 43,5 x 55 x 16,75 mm | Zamak chrome-plated |
Serie 150.HG-JHW
self-closing, drilled and countersunk
With constant torque.
aperture angle approx. 115°. Hinge with built-in dampers.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHW16S-34.85 | 85 x 59 x 12,5 mm | PBT dunkelgrey |
150.HG-JHW16S-50.85 | 85 x 59 x 12,5 mm | PBT dunkelgrey |
150.HG-JHW16S-00.85 | 85 x 59 x 12,5 mm | PBT dunkelgrey |
150.HG-JHW16S-34G.85 | 85 x 59 x 12,5 mm | PBT dunkelgrey |
150.HG-JHW16S-50G.85 | 85 x 59 x 12,5 mm | PBT dunkelgrey |
Serie 150_HG-JHW
aperture angle approx. (115°), drilled and countersunk
Hinge with built-in dampers.
Install a stopper such as a stay at the lid opening. Closing position (0 ~ 115 degree) for not exceeding the specified swivelling range.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHW50.85 | 115 x 72 x 12,5mm | PBT dunkelgrey |
150.HG-JHW70.85 | 115 x 72 x 12,5mm | PBT dunkelgrey |
Serie 150.HG-JHWG
self-opening, drilled and countersunk
With constant torque.
aperture angle approx. 115°. Hinge with built-in dampers.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHW50G.85 | 115 x 72 x 26,5 mm | PBT dunkelgrey |
150.HG-JHW70G.85 | 115 x 72 x 26,5 mm | PBT dunkelgrey |
Serie 6879
drilled
With constant torque.
aperture angle approx. 115°, Hinge with built-in damper. Smooth movement in the opening direction.
Art.-No. | Dimensions | Material |
---|---|---|
6879.01.02 | 75 x 60 x 26,5 mm | PBT dunkelgrey |
6879.02.85 | 75 x 60 x 26,5 mm | PBT dunkelgrey |
Serie 6198
drilled
With constant torque.
Friction in one direction only. Torque per pair: 9 N/m. Initial torque can vary between -20% and +40%.
Art.-No. | Dimensions | Material |
---|---|---|
6198.01.70 | 77,5 x 60 x 16 mm | Aluminium anodised |
6198.02.70 | 77,5 x 60 x 16 mm | Aluminium anodised |
Serie 150.HG-JHM
drilled
With constant torque. Mortise mount type.
Hinge with built-in dampers. Smooth movement in the opening direction. Minimum door thickness 8mm. Damper mechanism works when opening the lid by about 60°.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHM20-80BL.87 | 54 x 66 x 21,9 mm | POM black |
150.HG-JHM20-80WT.81 | 54 x 66 x 21,9 mm | POM white |
Serie 150.HG-JHM
drilled
Hinge with built-in damper and constant torque for side mounting.
temperaturee resistance: 0 ~ 40 °C, aperture angle 105°, minimum lid thickness 8 mm, Damper mechanism works when opening the lid by about 60°.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHM14-S-8BL.87 | 48 x 48 | POM black |
150.HG-JHM14-S-15BL.87 | 48 x 48 | POM black |
150.HG-JHM14-S-20BL.87 | 48 x 48 | POM black |
150.HG-JHM14-S-8WT.81 | 48 x 48 | POM white |
150.HG-JHM14-S-15WT.81 | 48 x 48 | POM white |
150.HG-JHM14-S-20WT.81 | 48 x 48 | POM white |
Serie 150.HG-JH
drilled and countersunk
Soft-Close Hinge with built-in damper and constant torque.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JH14-50.33 | 46 x 100 x 21 | Stainless steel hochglanzpolished |
Serie 150.HG-JHM9-S
drilled and countersunk
Hinge with built-in damper and constant torque for side mounting.
temperaturee resistance: 0 ~ 40 °C, aperture angle 105°
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHM9-SBL.87 | 43 x 32 x 13,2 mm | POM black |
150.HG-JHM9-S4BL.87 | 43 x 32 x 13,2 mm | POM black |
150.HG-JHM9-SWT.81 | 43 x 32 x 13,2 mm | POM white |
150.HG-JHM9-S4WT.81 | 43 x 32 x 13,2 mm | POM white |
Serie 150.HG-JHS9-S
drilled and countersunk
Small damper hinge with self-opening function built-in damper, adjustable torque for side mounting.
temperaturee resistance: 0 ~ 40 °C, aperture angle 105°
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHS9-SBL.87 | 43 x 32 x 13,2 mm | POM black |
150.HG-JHS9-SWT.81 | 43 x 32 x 13,2 mm | POM white |
Serie 150.HG-JHM9-U
drilled and countersunk
Hinge with built-in damper and constant torque for die Montage from unten.
temperaturee resistance: 0 ~ 40 °C, aperture angle 105°
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHM9-UBL.87 | 43 x 32 x 13,2 mm | POM black |
150.HG-JHM9-H4BL.87 | 43 x 32 x 13,2 mm | POM black |
150.HG-JHM9-UWT.81 | 43 x 32 x 13,2 mm | POM white |
150.HG-JHM9-H4WT.81 | 43 x 32 x 13,2 mm | POM white |
Serie 150.HG-JHS9-U
drilled and countersunk
Small damper hinge with self-opening function built-in damper and adjustable torque for die Montage from unten.
temperaturee resistance: 0 ~ 40 °C, aperture angle 105°.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-JHS9-UBL.87 | 43 x 32 x 13,2 mm | POM black |
150.HG-JHS9-UWT.81 | 43 x 32 x 13,2 mm | POM white |
Serie 150.HG-CSH63
drilled
Hinge with constant torque and with adjustable torque.
Detent at both 0° and 100°. Torque not adjustable.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-CSH631.71 | 63 x 80 x 5 mm | Aluminium anodised |
150.HG-CSH63AM2.71 | 63 x 80 x 5 mm | Aluminium anodised |
150.HG-CSH63AH2.71 | 63 x 80 x 5 mm | Aluminium anodised |
150.HG-CSH63BM3.71 | 63 x 80 x 5 mm | Aluminium anodised |
150.HG-CSH63BH3.71 | 63 x 80 x 5 mm | Aluminium anodised |
Serie 150.HG-PA
drilled
Lift Assist with adjustable torque.
Easy to lift heavy top-opening lid with spring tension. Smooth and soft-closing movement at the end, preventing Lid from slamming shut.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-PA180-9.30 | 100 x 178 x 40 mm | Stainless steel |
Serie 150.HG-PA
drilled
Lift Assist with adjustable torque and plastic cover (PBT light grey).
Easy to lift heavy top-opening lid with spring tension. Smooth and soft-closing movement at the end, preventing Lid from slamming shut. Adjustable torque (± 5%).
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-PA200-15.30 | 150 x 201 x 42 mm | Stainless steel |
150.HG-PA200-20.30 | 150 x 201 x 42 mm | Stainless steel |
150.HG-PA200-25.30 | 150 x 201 x 42 mm | Stainless steel |
150.HG-PA201-15.30 | 150 x 201 x 42 mm | Stainless steel |
150.HG-PA201-20.30 | 150 x 201 x 42 mm | Stainless steel |
150.HG-PA201-25.30 | 150 x 201 x 42 mm | Stainless steel |
Serie 150.HG-PA
drilled
Lift Assist with adjustable torque and plastic cover (PBT light grey).
Easy to lift heavy top-opening lid with spring tension. Smooth and soft-closing movement at the end, preventing Lid from slamming shut. Adjustable torque (± 5%).
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-PA270-35.30 | 182 x 274 x 56 mm | Stainless steel |
150.HG-PA270-45.30 | 182 x 274 x 56 mm | Stainless steel |
Serie 150.HG-PA
drilled
Lift Assist with adjustable torque mit Stopperplatte and plastic cover (PBT light grey).
Able to limit the 140° opening angle to 55° or 80° with use of the included stopper plate. Easy to lift heavy top-opening lid with spring tension. Smooth and soft-closing movement at the end, preventing Lid from slamming shut.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-PA210-9.30 | 100 x 205 x 43,5 mm | Stainless steel |
Serie 150.HG-PA
drilled
Lift Assist detend function with plastic cover (PBT light grey).
Easy to lift heavy top-opening lid with spring tension. Smooth and soft-closing movement at the end, preventing Lid from slamming shut. Adjustable torque (± 5%).
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-PA230-15.30 | 152 x 231 x 43,5 mm | Stainless steel |
150.HG-PA230-20.30 | 152 x 231 x 43,5 mm | Stainless steel |
150.HG-PA230-25.30 | 152 x 231 x 43,5 mm | Stainless steel |
150.HG-PA231-15.30 | 152 x 231 x 43,5 mm | Stainless steel |
150.HG-PA231-20.30 | 152 x 231 x 43,5 mm | Stainless steel |
150.HG-PA231-25.30 | 152 x 231 x 43,5 mm | Stainless steel |
Serie 6874
with constant torque, drilled and countersunk
Locking position every 30° from 0° to 270°. With 4 different available locking moments.
Art.-No. | Dimensions | Material |
---|---|---|
6874.01.77 | 67 x 55 x 4,5 mm | Aluminium 6060 T5 anodised black |
6874.02.77 | 67 x 55 x 4,5 mm | Aluminium 6060 T5 anodised black |
6874.03.77 | 67 x 55 x 4,5 mm | Aluminium 6060 T5 anodised black |
6874.04.77 | 67 x 55 x 4,5 mm | Aluminium 6060 T5 anodised black |
Serie 6875
with stainless steel pin, drilled and countersunk
Locking position every 90°
Maximum weight of the door: 1.2 kg for 2 hinges
Art.-No. | Dimensions | Material |
---|---|---|
6875.01.80 | 50 x 60 x 9 mm | Plastic-Polyacetal ivory |
6875.02.80 | 50 x 60 x 9 mm | Plastic-Polyacetal black |
Serie 6871
drilled and countersunk
Locking position every 30° from 0° up to 270°
Drag moment is not adjustable
Art.-No. | Dimensions | Material |
---|---|---|
6871.06.71 | 30 x 35 x 3 | Aluminium 6060 T5 anodised / colourless |
6871.06.77 | 30 x 35 x 3 | Aluminium 6060 T5 anodised / colourless |
Serie 150.HG-MPS2
drilled
Locking positions: -10°, 120° and 170°,
can be used horizontally or vertically
Additional stopper is recommended at 0° (fully closed) and 170° (fully opened)
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-MPS2-BL.87 | 30 x 30 x 4,75 mm | PBT black |
150.HG-MPS2-WT.81 | 30 x 30 x 4,75 mm | PBT white |
Serie 150.HG-FH128
Locking positions: at 60 ° and 120 °, drilled and countersunk
Depth and horizontal adjustment can also made after installation.
Fluororesin washer at redation part ensures smooth operation
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-FH128.51 | 128 x 128,6 mm | Zamak nickel-plated |
Serie 150.CH-75
Locking positions: 0°, 90° and 180°, drilled and countersunk
Cushion funtion absorbs impact at full opening and unexpected external force.
Cushion function absorbs impact at full opening and unexpected external force
Art.-No. | Dimensions | Material |
---|---|---|
150.CH-75-NI.51 | 75 x 60 | Zamak nickel-plated |
150.CH-75-GB.55 | 75 x 60 | Zamak bronzed |
Serie 150.HG-RCT15-C
use in pairs, drilled and countersunk
Ratchet mechanism holds at angels in 5° increment from closed to opened position, the friction (resistance) function works even when release the ratchet mechanism.
When the mounting width of hinge is more than 400mm, the ratchet mechanism may not work simultaneously on the left and right.
Art.-No. | Dimensions | Material |
---|---|---|
150.HG-RCT15-C.01 | 111,5 x 79 mm | Steel nickel-plated |
The biggest advantage of torque hinges is undoubtedly that they automatically maintain any set position with millimetre precision, making them perfect for use in industrial control panels and monitors. An integrated additional locking mechanism prevents the monitor from sagging due to vibrations, for example. The functional principle of friction also gives the user a pleasant and smooth movement.
Our hinges are available with different pin diameters, drilled or undrilled and in various perforations and surface finishes and have a constant torque over the entire adjustment range.
Our hinges offer a lot of torque in a small space, so particular care should be taken during assembly and the workpiece to be assembled should be able to absorb the high torques and forces.
You may choose from our very large assortment of torque and catching hinges according to different lengths, bracket width and form, bolt aperture, perforations and surface finishes.
In the case the wanted product is not illustrated in the layout, please send us an enquiry. We are able to produce a multiplicity of different components with little effort, even in small quantities.
More details can be found in this PDF data file:
Design your individual Hinges, Piano Hinges and weld-on Hinges:
Additional Hinges:
You may choose from our very large assortment of torque and catching hinges according to different lengths, bracket width and form, bolt aperture, perforations and surface finishes.
In the case the wanted product is not illustrated in the layout, please send us an enquiry. We are able to produce a multiplicity of different components with little effort, even in small quantities.
More details can be found in this PDF data file:
Design your individual Hinges, Piano Hinges and weld-on Hinges:
Additional Hinges: